Please note current model comes under part number PSF10i
The Eaton 10 Amp Surge Protector / Inline Power Filter (SSF10I) - from UPS Place - is designed to provide secondary protection against power surges caused by external sources such as lightning strikes & substation switching, as well as providing a measure of protection from surge events generated on the secondary side of the filter. The unit has been designed in accordance with AS3100, AS1768, IEC61643-1, IEC61000-6-1, 2, 3, 4 & other standards & codes as applicable.
The SSFI is a 3-stage protection unit utilising primary & secondary MOV protection in conjunction with a Low-Q LC filter. The unit provides filtering of the line harmonics, noise & RF transmitters with a cut-off frequency of <10kHz & a minimum attenuation of 40dB above 1Mhz. The operation status of the SSFI is indicated by lamps on the front panel. The "OK" light indicates that power is applied to the SSFI. The "FAULT" light indicates that the surge protection circuitry is damaged & the unit should be replaced. An ideal device for Category A locations.
?§ Surge suppression & filtering in a single package
?§ Small footprint, modular design
?§ Enclosed in IP 20 painted metal housing
?§ Surge suppression rating of 20kA (L-N)
?§ Protection Fail Indicators
?§ 3 mode, 3 Stage Protection
?§ Surge Filter, 1 Phase 10A & 15A, 25kA Primary ?½ 12 Month Warranty
?§ Plug-in UPS systems
?§ Portable instrumentation
?§ POS systems
?§ Small office systems
?§ Industrial & rural surge prone sites